[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Adding a third keypad to a Caddx NX-8, wiring help requested!

Subject: Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
From: cctvbahamas@xxxxxxxxxxx
Date: 20 Aug 2005 03:17:57 -0700
Newsgroups: alt.security.alarms
References: <1124325989.739589.202500@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <DZRMe.22479$Rm3.14481@xxxxxxxxxxxxxxxxxxxxxx> <vm5dg1hvefdfv7fl9n761ghr2m33a814qm@xxxxxxx> <GGwNe.25779$Rm3.2307@xxxxxxxxxxxxxxxxxxxxxx> <1124508182.566118.245450@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <rExNe.480$ZD4.197@xxxxxxxxxxxxxxxxxxxxxx> <gfodg1hsama06qqhqnaqbjbjb7rst066m4@xxxxxxx> <vuBNe.37819$rp.31847@xxxxxxxxxxxxxxxxxxxxxx>

it "reduces" it, but doesn't get rid of it.
Run a piece of cat5 close enough to a florescent light, connect a
couple passive baluns and a camera, and watch it "scroll" :-)

References:
- Adding a third keypad to a Caddx NX-8, wiring help requested!
  - From: brim
- Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
  - From: joe
- Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
  - From: Robert L Bass
- Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
  - From: Karl Magnus
- Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
  - From: Jim
- Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
  - From: Karl Magnus
- Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
  - From: Robert L Bass
- Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
  - From: Karl Magnus

Prev by Message: Re: Smoke detector question
Next by Message: FS: High End Digiop G2 Video Surveillance system
Previous by thread: Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
Next by thread: Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home