[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Adding a third keypad to a Caddx NX-8, wiring help requested!

Subject: Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
From: joe <nospam@xxxxxx>
Date: Fri, 19 Aug 2005 23:59:07 -0400
Newsgroups: alt.security.alarms
References: <1124325989.739589.202500@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <DZRMe.22479$Rm3.14481@xxxxxxxxxxxxxxxxxxxxxx> <vm5dg1hvefdfv7fl9n761ghr2m33a814qm@xxxxxxx> <GGwNe.25779$Rm3.2307@xxxxxxxxxxxxxxxxxxxxxx>

Karl Magnus wrote:

>
> Perhaps not in this case, but on many systems by a certain mfg., using
> solid wire for the keypad run invites nightmares.
>
> KM

ie. Ademco's APEX Destiny 6100 [musta been where I came up with the idea
as I have one in my house], 2100, along with some boat and RV systems
and gate/perimeter systems, Lenel Command keypads, IEI 232iLM keypad, etc.

Follow-Ups:
- Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
  - From: Robert L Bass

References:
- Adding a third keypad to a Caddx NX-8, wiring help requested!
  - From: brim
- Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
  - From: joe
- Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
  - From: Robert L Bass
- Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
  - From: Karl Magnus

Prev by Message: Re: Connecting 4-wire smokes to Ademco V15P
Next by Message: Re: 6270 Keypad Problems
Previous by thread: Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
Next by thread: Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home