Re: Ademco Lynx Panel - Phone Troubles

["Ricky C" <hockey_nut_44@xxxxxxxxx>]

Thanks for the responses guys. These are a great help.

So hardwire the phone to the terminal screws and forget the RJ31 jack,
leave it empty?

Thanks, this is a HUGE help.

-R

Crash Gordon wrote:
> Terminals 2 & 3 are tip & ring to the street, 4 & 5 are tip & ring to the
> house...you probably have the phone line wired incorrectly
>
> ...or a programming error.
>
>
>
> "Ricky C" <hockey_nut_44@xxxxxxxxx> wrote in message
> news:1124851953.714070.94950@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> > Guys,
> > A home owner pleading for some help:
> >
> > Hey just curious if anyone has experience with Ademco Lynx panels and
> > getting them to dial out from the standard phone jack on the panel.
> >
> > Mine is all setup menu wise but it fails to dial out to the central
> > monitoring station when testing. I tested the phone jack(standard),
> > checks out okay. Plus we have tweaked the panel settings and triple
> > checked them with the monitoring service. It's still not calling
> > out....
> >
> > Any help would be greatly appreciated. Thanks for reading my posting.
> > Cheers!
> > -R
> >
> >