Re: Unused Zones

["Russell Brill" <russwbrill@xxxxxxxxxxxxx>]

"alarman" <alarman2000@xxxxxxxxx> wrote in message
news:CbTJe.299914$Qo.220979@xxxxxxxxxxxxx
> Nick <pn.damico@xxxxxxxxx> wrote in message
> news:1123533900.655866.40250@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>> What is the appropriate way to handle unused zones on an alarm system.
>> I am using a Caddx NX-8e.
>>
>> I have a handful of zones on an expansion card that I am not using.  I
>> currently have the jumpered with a resistor in the panel.
>
> I just jump them out with a resistor.
> js
>
>
>
Jack,

When using only eight (or less) of the sixteen zones on the NX-216E, turn
Dip Switch #6 (1 - 5 are used to set the Module Address) to the "On"
position, it will disable the second group of eight zones on the
expander......... Regards, Russ