Re: CADDX... finally breaking down and asking...

["Dr. Phil" <nospam@xxxxxxxxxx>]

Hector wrote:

> Folks, your help would be appreciated.  As many before me have said... this
> Caddx equipment is good stuff, but not programmer-friendly.  I program
> industrial control and safety systems for a living and yet I'm here seeking
> help because of lousy documentation.
>
> Here's my configuration:  NX-8E, NX-216E and two NX-148E LCD keypads (one at
> address 192, the other at 200).  I've got two entry/exit points (zone type
> 3's); one from the garage and one from the front door.  When coming in from
> the garage, the keypad is two steps from the door.  When coming in the front
> door, I must cross two motion detectors (zone type 12's) to get to the
> keypad.
>
> 1.  The status LEDs on the two keypads don't jive.  One seems to be just
> fine and the other I often see all 5 LEDs on-steady:  stay, chime, exit,
> bypass and cancel.  Doesn't seem to affect functioning, but I just don't
> feel it's acting right.  Is this normal?
>
no.  might still be in program mode.  press exit several time on the
keypad that has 5 function lites lit