[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: DSC Maxsys PC 4020 Reporting probs.

Subject: Re: DSC Maxsys PC 4020 Reporting probs.
From: "Anonymoose" <none@xxxxxxxxxxxxx>
Date: Sat, 30 Apr 2005 04:08:24 GMT
Newsgroups: alt.security.alarms
References: <ycwce.6$i1.1@xxxxxxxxxxxxxxxxxxxxxx> <ke6dncdVxctGMu_fRVn-gA@xxxxxxxxxxx> <oABce.49$i1.37@xxxxxxxxxxxxxxxxxxxxxx> <uNGdnc6hS6YxbO_fRVn-tg@xxxxxxxxxxx>

"Mark Leuck" <m..leuck@xxxxxxxxxxx> wrote in message
news:uNGdnc6hS6YxbO_fRVn-tg@xxxxxxxxxxxxxx
>
> It should work fine unless you have bad phone lines, a screwed up panel
> communicator or bad receiver
>
Heres what I've done:
> 1. I've replaced the board, left all zone devices off
> 2. I've tested & changed the phone line to another # and cable
> 3. I've deleted all programming and left only phone #1 active
> 4. I've changed power supplies
> 5. I've dabbled in programming changing subtle settings.
> None of these work.

Follow-Ups:
- Re: DSC Maxsys PC 4020 Reporting probs.
  - From: Mark Leuck

References:
- DSC Maxsys PC 4020 Reporting probs.
  - From: Anonymoose
- Re: DSC Maxsys PC 4020 Reporting probs.
  - From: Mark Leuck
- Re: DSC Maxsys PC 4020 Reporting probs.
  - From: Anonymoose
- Re: DSC Maxsys PC 4020 Reporting probs.
  - From: Mark Leuck

Prev by Message: Re: newbie needs advice
Next by Message: Re: Glass breaks again...
Previous by thread: Re: DSC Maxsys PC 4020 Reporting probs.
Next by thread: Re: DSC Maxsys PC 4020 Reporting probs.
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home