[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: NX6 event log

Subject: Re: NX6 event log
From: Chuck Norris <nospam@xxxxxxxxx>
Date: Sun, 10 Apr 2005 08:37:04 -0400
Newsgroups: alt.security.alarms
References: <0Yb5e.47430$wo1.46934@xxxxxxxxxxxxxxxxxxxxxx> <OsydnTwck_zyucrfRVn-gA@xxxxxxxxxxx> <T3G5e.52060$wo1.20865@xxxxxxxxxxxxxxxxxxxxxx> <1_Z5e.50584$vK6.17865@xxxxxxxxxxxxxxxxxxxxxx> <TfSdnapcTNrIHMXfRVn-vA@xxxxxxxxxxx>

Rich wrote:

> OK       NX 8    I have 15  in service
>
> Can you see the scann?
>

not sure what you mean by scann?

Do you use a separate keypad for door strike and system arm/disarm?

I finally got some time and threw a NX6  on the bench hooked to a 586 &
laptop for quick up/downloads last night.
Hooked buzzer to aux 1.
Programmed code 1 to trip aux 1 but not to arm panel.  Buzzer buzzes. No
event log entry.
Then
Programmed code 1 to arm/disarm with & without aux 1.  event log entry
after exit delay finished. & when disarmed.
No event log entry for aux outputs on the NX6.
Don't feel bad, GE guys said it would work too.

Follow-Ups:
- Re: NX6 event log
  - From: Rich

References:
- NX6 event log
  - From: Chuck Norris
- Re: NX6 event log
  - From: Rich
- Re: NX6 event log
  - From: Chuck Norris
- Re: NX6 event log
  - From: Chuck Norris
- Re: NX6 event log
  - From: Rich

Prev by Message: Re: Do You Want To Know For Sure That You Are Going To Heaven? The reason some people don't know for sure if they are going to Heaven when they die is because they just don't know. The good news is that you can know for sure that you are going to Heaven wh
Next by Message: Re: Ademco Vista question...
Previous by thread: Re: NX6 event log
Next by thread: Re: NX6 event log
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home