Re: NX6 event log

["Rich" <Never@xxxxxxx>]

At this point yes, unless you can direct me to do it better.

I noted I had to check the Activate the aux output.

Rich





"Chuck Norris" <nospam@xxxxxxxxx> wrote in message
news:B096e.37138$UW6.22499@xxxxxxxxxxxxxxxxxxxxxxxxx
> Rich wrote:
>
> > OK       NX 8    I have 15  in service
> >
> > Can you see the scann?
> >
>
> not sure what you mean by scann?
>
> Do you use a separate keypad for door strike and system arm/disarm?
>
> I finally got some time and threw a NX6  on the bench hooked to a 586 &
> laptop for quick up/downloads last night.
> Hooked buzzer to aux 1.
> Programmed code 1 to trip aux 1 but not to arm panel.  Buzzer buzzes. No
> event log entry.
> Then
> Programmed code 1 to arm/disarm with & without aux 1.  event log entry
> after exit delay finished. & when disarmed.
> No event log entry for aux outputs on the NX6.
> Don't feel bad, GE guys said it would work too.