[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]
Re: Impedance Matching Volume Control
Thanks a lot for your reply Robert!
I have modified my drawing. It can now be seen here:
http://img382.imageshack.us/img382/1479/imvcv2rt3.jpg
I have followed your advice to have one pair of speakers per IMVC. It also
means that I need 2 A/B Switch (one per IMVC in that room).
Scenario 1: all speakers set to AMP 1 (assume IMVC set at 8X)
AMP 1: 1/64 +1/64+1/64+1/64+1/64 = 5/64 ? 64/5 ? 12.8 Ohm
AMP 2: 0 ????
Sceanrio 2: room 3 on Amp 2, others on AMP 1
AMP 1: 1/64+1/64+1/64= 3/64 ?64/3 ? 21.3 Ohm
AMP 2: 1/64+1/64 = 1/32 ? 32 Ohm
Are my calculations correct? Aren't 12.8, 21.3 and 32 Ohm too high for the
amp? What about AMP 2 in scenario 1, doesn't it see a short?)
alt.home.automation Main Index |
alt.home.automation Thread Index |
alt.home.automation Home |
Archives Home