[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: X10 signal problems...

Subject: Re: X10 signal problems...
From: "Stanley Barthfarkle" <sbarth@xxxxxxxxx>
Date: Thu, 20 Oct 2005 05:20:35 GMT
Newsgroups: alt.home.automation
References: <1129657631.256522.291080@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <8Ul5f.146$jV2.145@xxxxxxxxxxxxxxxxxxxxxxxxxx> <1129739376.958036.94570@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <vAA5f.821$Y61.415@xxxxxxxxxxxxxxxxxxxxxxxxxx> <1129769043.987498.213120@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <1129785346.976142.235710@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>

Install a coupler/repeater. The repeater portion will amplify and
re-broadcast the signal.



<mike2711@xxxxxxxxx> wrote in message
news:1129785346.976142.235710@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> What I meant to say is that it's not hooked up to a GFCI....the problem
> still exists!
>

Follow-Ups:
- Re: X10 signal problems...
  - From: mike2711

References:
- X10 signal problems...
  - From: mike2711
- Re: X10 signal problems...
  - From: Stanley Barthfarkle
- Re: X10 signal problems...
  - From: mike2711
- Re: X10 signal problems...
  - From: Stanley Barthfarkle
- Re: X10 signal problems...
  - From: mike2711
- Re: X10 signal problems...
  - From: mike2711

Prev by Message: Re: What chip was used on the DTMF Weeder Kit?
Next by Message: CP290 software
Previous by thread: Re: X10 signal problems...
Next by thread: Re: X10 signal problems...
Index(es):
- Message
- Thread

alt.home.automation Main Index | alt.home.automation Thread Index | alt.home.automation Home | Archives Home