The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: Re: xPLMediaNet DHCP - mystery possibly solved


  • Subject: RE: Re: xPLMediaNet DHCP - mystery possibly solved
  • From: "Tony Tofts" <tony@xxxxxxxxxx>
  • Date: Sun, 31 Jul 2005 08:17:12 +0100

Hi Dirk,

> Tried hooking directly to the SMC router and works fine but
> when I hook up the ethernet bride it never finds the server.
> Any advice besides pull out the cat5?

I can't give any advise on a wireless bridge (i.e. a bridge unit at both
ends), however I do run one of my rio's wirelessly without any problems

My setup for this is a single linksys WET11 wireless bridge connected to my
rio, and the bridge connects wirelessly to my vigor2600g wireless router

I'm assuming your'e using an equivalent to the WET11 at both ends?

I can't see why this should be a problem, but have never tried it. Anyone
else?

If you have separate dhcp then try booting the rio with xplrionet turned
off, eventually the rio should give up looking for it and display it's ip.
This will prove if the bridge is working.

Regards
Tony




xPL Main Index | xPL Thread Index | xPL Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.