The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: Trouble getting started with Rio Receiver


  • Subject: RE: Trouble getting started with Rio Receiver
  • From: "Keith Doxey" <ukha@xxxxxxxxxxx>
  • Date: Sat, 4 Sep 2004 10:19:17 +0100

169.x.x.x are the types of address that Windows gicves itself when it fails
to find a DHCP address.

Sounds like you either dont have any network connectivity or you dont have
a
DHCP server running. Can you assign a static IP address in the correct
range?*

Keith

* Dont know anything about the Rio so this may not be a valid option!!

> -----Original Message-----
> From: konofo [mailto:konofo@xxxxxxx]
> Sent: 04 September 2004 07:51
> To: ukha_xpl@xxxxxxx
> Subject: [ukha_xpl] Trouble getting started with Rio Receiver
>
>
> I just acquired a used Rio Receiver, and I haven't been able to get
> everything working together yet.  Here's an outline of what I've
> tried so far:
>
> - Installed .NET framework
> - Installed xPLRioNet
> - Changed IP addresses in .xml files as instructed
> - Started service
> - Ran .mp3 scan
> - Connected Rio Receiver to network and turned it on
>
> The Rio says "Searching for music server" for quite a while,
then
> eventually shows the following indefinitely:
>
> info net:pna ip:169.254.159.253
> n:255.255.0.0 g:255.255.255.255
>
> The IP strikes me as incorrect, it should be 192.168.0.x.  I've tried
> with DHCP flagged Y and N in the configuration, with no luck.
>
> Any ideas?
>




xPL Main Index | xPL Thread Index | xPL Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.