The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: 1 Wire Temperature


  • Subject: Re: 1 Wire Temperature
  • From: frostie2001uk
  • Date: Sat, 13 Mar 2004 15:56:00 +0000

What do i need to download from maxim to get it to work, it is asking
if the owapi is installed....

Thanks
Neil

--- In <a
href="/group/ukha_xpl/post?postID=-0HU3Wls6Wj0PsRr9e5pG_gHZmAki1rI40MBz42Qx8wpKa62gFCacLNKNs_48EK21EpqjuC8FYIW0_GC0tg">ukha_xpl@xxxxxxx</a>,
"Steve Cooper" <steve.cooper@u...>
wrote:
> All you need is a xpl hub running on the other machine.
>
> As long as the two machine are on the same network the message will
> be passed between the hubs. I normally have xplhal with its built
in
> hub on my main machine and then have a vb6 hub from tony's site
> running on the other machine with my 1-wire xpl app.
>
> S.
>
> --- In <a
href="/group/ukha_xpl/post?postID=-0HU3Wls6Wj0PsRr9e5pG_gHZmAki1rI40MBz42Qx8wpKa62gFCacLNKNs_48EK21EpqjuC8FYIW0_GC0tg">ukha_xpl@xxxxxxx</a>,
"frostie2001uk" <Neil.Frost@s...>
> wrote:
> > I have a different server that has my 1Wire network on it..
> >
> > Ok it's only one temperature sensor at the moment but as time
goes
> > on.....
> >
> > Any way is it possible to get the readings from that server and
> > record the temperature readings in the xQL database that runs on
> the
> > other server that runs xPLHal?
> >
> > I've looked at the temperature script on gadgetshed, but don't
know
> > how to get from one server to the other.
> >
> > Thanks
> >
> > Neil






xPL Main Index | xPL Thread Index | xPL Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.