[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: xplRioNet : trouble pre-setting volume
Hi, I hope you don't have any plans to change the way the lineout
option works, as I use both lineout and the built in amp on the rio
in my consirvatory. The lineout goes to a 5.1 amp which splits off
the bass, and the rio amp goes to speakers in the garden. I can't
really use the amp for the speakers in the garden, as It takes out
all the bass, but with the setup above I can get a good level on both
sets and control them from front dial.
Oh yeah. Thanks for all your work on the software Its the only real
windows solution for the Rio. Now I just need a better interface for
my kiss DP1500
Dan
--- In ukha_xpl@xxxxxxx, "Tony Tofts" <tony@x> wrote:
> > with the lineout=y the front dial controls the volume (as
> > does the web page). With lineout=n the line out is at max
> > volume, though someone may want the front panel to control
> > lineout volume, or be able to set it remotely - especially as
> > mute wont mute with lineout=n
>
> Hi Andy,
>
> I think there are several issues here.
>
> Firstly volume level/mute should only work with either lineout (when
> lineout=y) or built-in amp (when lineout=n). There's no control of
lineout
> with lineout=n and no control of amp with lineout=y. At least there
> shouldn't be as control is mutually exclusive.
>
> I think that rather than being a global option lineout should
probably be
> changed to a unit specific option?
>
> So, to maintain compatibility, lineout="y" in xplrionet.xml
would
mean
> always use lineout, whereas lineout=n would mean use built-in amp
control
> unless a new config item per rio called lineout=y?
>
> Do you think this would solve the issues?
>
> Many thanks
> Tony
xPL Main Index |
xPL Thread Index |
xPL Home |
Archives Home
|