Re: More homeseer level issues.

[Kevin Hawkins <lists@xxxxxxxxxxxxxxxxx>]

Hi Ian,

You mean the value displayed in the status column Ian ?

This value is calculated and updated by the returned .event message from
your endpoint - could you post an example of the xAPBSC.cmd message that
HS sends when you click the % setting and also the resulting
xAPBSC.event message from your device .

What resolution is your device - ie how many discreet steps of
brightness ? Setting a 16 level device to say 60% could never work for
example..

9/16 = 56.25%
10/16 = 62.5 %

Kevin

Ian Davidson wrote:
>
> Hi
>
>
> As I have mention the missing messages and old values problem is fixed
> and xap messages appear every time now.
>
> One strange thing remaining is when setting the level on the status
> screen most of the values are slightly out like this:
>
> Changed to Goes to
>
> 0 0
>
> 10 10
>
> 20 19
>
> 30 29
>
> 40 39
>
> 50 52
>
> 60 61
>
> 70 71
>
> 80 81
>
> 90 90
>
> 100 100
>
> Now I know it is only slightly out and a couple of percent of
> brightness wouldn?t make a difference, however I am using the BSC
> level value on different channels to perform different functions. One
> of the functions is a recall preset function i.e. level=10 recall
> preset 10. So if the level is out even by one it will recall the wrong
> preset. The non xap devices in HS function correctly it is only the
> xap devices which show this effect.
>
> Thanks
>
> Ian D
>
>