Re: Code release Nanode xAP One Wire Temp

["Christopher" <lightningboltz@xxxxxxx>]

Yes,  I've commented that define out.  I've also tried commenting out DHCP
to assign a static IP but had no luck.




--- In xap_automation@xxxxxxx, Lehane Kellett <lehane@...> wrote:
>
> Hi,
> Have you changed the compile time #define FRAM option?
>
> Has the board worked on Ethernet previously?
>
> Lehane
>
>
>
>
>
> On 29/01/2012 15:35, Christopher wrote:
> >
> > Thanks for posting this. I've uploaded it to my nanode and see it
> > attempting to get an IP address from my DHCP server but it never
seems
> > to take it. Will this work with an off the shelf nanode or do I
need
> > to add on a FM25256 chip on the bottom of the board?
> >
> > Thanks
> >
> > --- In xap_automation@xxxxxxx
> > <mailto:xap_automation%40yahoogroups.com>,
Lehane Kellett <lehane@>
> > wrote:
> > >
> > > Whilst I haven't finished the final test around the number
of sensors
> > > per pin, I've decided to release the code anyway.
> > >
> > > Please feel free to improve, etc., as you see fit.
> > >
> > > http://www.mm-wave.com/honeycottage/bsctemp.htm
for more info and the
> > > code download.
> > >
> > > Regards,
> > > Lehane
> > >
> >
> >
>




------------------------------------