[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Re: Server Crash
------=_Part_23956_652542.1191396132179
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
I wonder if it could be a power, rather than software, related problem?
PICs
can be a bit temperamental with dirty power. Is there anyway you can
eliminate that from the equation, perhaps by moving everything together
whilst testing?
Patrick
On 10/3/07, frostie2001uk <neil@xxxxxxx> wrote:
>
> Hi Keving
>
> HoneyCottage is the website I got the TOM10 software from
>
> http://www.honeycottage.mm-wave.com/tom10.htm
>
> The shuttle is in the lounge running all the xAP stuff
> The MSS100 is in the cupboard upstairs connected to the TOM10 board.
> It's all connected over my local network, not the internet.
>
> I can see the TOM10 in the message viewer but no temperature
> sensors...
>
> This was working when connected locally to the shuttles USB port (It
> used a serial to USB converter. Now it's connected to the MSS100
> serial port.
>
> HTH
>
> Neil
> --- In xap_automation@xxxxxxx, Kevin Hawkins <lists@...>
> wrote:
> >
> > If you use the COM port redirector can you actually see the TOM10
-
>
> > ignoring the xAP conduit fttb ?
> >
> > You'll have to expand on where HoneyCottage fits into this - is
it
> > remote to the new Shuttle which I think is where you are running
> the xAP
> > conduit ?.
> >
> > Or perhaps you are using redirector over the internet to the
TOM10
> and
> > running the xAP conduit locally in which case I can't see where
> the
> > Shuttle under the PC comes in ?
> >
> > xAP will not route over the internet unless you use xRouter -
from
> mi4.
> >
> > Kevin
> >
> > frostie2001uk wrote:
> > > Hi
> > >
> > > The HDD on my server has died :( I managed to get a lot of
the
> data
> > > of so that's ok. I've managed to convince SWMBO to let me
have
> the
> > > server in the lounge under the TV (its a shuttle-esk box so
> looks
> > > ok).
> > >
> > > Trouble is I'm using a TOM10 which is in the airing
cupboard.
> I've
> > > put an MSS100 on the end of it and bodged the USB power to
the
> TOM10
> > > using an NSLU2 for now...
> > >
> > > I can get the power led on the TOM10 on. I can using the com
> port
> > > redirector to show up on the server and connect. I'm using
the
> xap
> > > plugin runtime for the TOM10 from here honey cottage.
> > >
> > > Trouble is I'm not seeing any temperatures.
> > >
> > > In the message viewer I can see MMWAVE.TOM10.Cornelius but
no
> > > temperatures...
> > >
> > > Does anyone have any ideas?
> > >
> > > Thanks
> > > Neil
> > >
> > >
> > >
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> >
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
------=_Part_23956_652542.1191396132179
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
<html><head>
<style type="text/css">
<!--
#ygrp-mkp{
border: 1px solid #d8d8d8;
font-family: Arial;
margin: 14px 0px;
padding: 0px 14px;
}
#ygrp-mkp hr{
border: 1px solid #d8d8d8;
}
#ygrp-mkp #hd{
color: #628c2a;
font-size: 85%;
font-weight: bold;
line-height: 122%;
margin: 10px 0px;
}
#ygrp-mkp #ads{
margin-bottom: 10px;
}
#ygrp-mkp .ad{
padding: 0 0;
}
#ygrp-mkp .ad a{
color: #0000ff;
text-decoration: none;
}
-->
</style>
</head>
<body>
I wonder if it could be a power, rather than software, related problem?
PICs can be a bit temperamental with dirty power. Is there anyway you can
eliminate that from the equation, perhaps by moving everything together
whilst testing?
<br><br>Patrick<br><br><div><span
class="gmail_quote">On 10/3/07, <b
class="gmail_sendername">frostie2001uk</b> <<a
href="mailto:neil@xxxxxxx";>neil@xxxxxxx</a>>
wrote:</span><blockquote class="gmail_quote"
style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt
0.8ex; padding-left: 1ex;">
Hi Keving<br><br>HoneyCottage is the website I got the TOM10
software from<br><br><a href="http://www.honeycottage.mm-wave.com/tom10.htm";>http://www.honeycottage.mm-wave.com/tom10.htm</a><br><br>The
shuttle is in the lounge running all the xAP stuff
<br>The MSS100 is in the cupboard upstairs connected to the TOM10
board.<br>It's all connected over my local network, not the
internet.<br><br>I can see the TOM10 in the message viewer but
no temperature<br>sensors...
<br><br>This was working when connected locally to the shuttles
USB port (It<br>used a serial to USB converter. Now it's
connected to the MSS100<br>serial
port.<br><br>HTH<br><br>Neil<br>--- In <a
href="mailto:xap_automation@xxxxxxx";>
xap_automation@xxxxxxx</a>, Kevin Hawkins
<lists@...><br>wrote:<br>><br>>
If you use the COM port redirector can you actually see the TOM10
-<br><br>> ignoring the xAP conduit fttb
?<br>><br>> You'll have to expand on
where HoneyCottage fits into this - is it
<br>> remote to the new Shuttle which I think is where you are
running<br>the xAP<br>> conduit
?.<br>><br>> Or perhaps you are using redirector
over the internet to the TOM10<br>and<br>> running the
xAP conduit locally in which case I can't see where
<br>the<br>> Shuttle under the PC comes in
?<br>><br>> xAP will not route over the internet
unless you use xRouter -
from<br>mi4.<br>><br>>
Kevin<br>><br>> frostie2001uk
wrote:<br>> > Hi<br>> >
<br>> > The HDD on my server has died :( I managed to
get a lot of the<br>data<br>> > of so
that's ok. I've managed to convince SWMBO to let me
have<br>the<br>> > server in the lounge under the
TV (its a shuttle-esk box so
<br>looks<br>> > ok).<br>>
><br>> > Trouble is I'm using a TOM10
which is in the airing cupboard.<br>I've<br>>
> put an MSS100 on the end of it and bodged the USB power to
the<br>TOM10<br>> > using an NSLU2 for now...
<br>> ><br>> > I can get the power
led on the TOM10 on. I can using the com<br>port<br>>
> redirector to show up on the server and connect. I'm using
the<br>xap<br>> > plugin runtime for the TOM10
from here honey cottage.
<br>> ><br>> > Trouble is
I'm not seeing any temperatures.<br>>
><br>> > In the message viewer I can see
MMWAVE.TOM10.Cornelius but no<br>> >
temperatures...<br>> ><br>> > Does
anyone have any ideas?
<br>> ><br>> >
Thanks<br>> > Neil<br>>
><br>> ><br>>
><br>> ><br>> > Yahoo!
Groups Links<br>> ><br>>
><br>> ><br>>
><br>>
><br>><br><br><br>
<br><br><br>Yahoo! Groups
Links<br><br><*> To visit your group on the web,
go to:<br> <a href="http://groups.yahoo.com/group/xap_automation/";>http://groups.yahoo.com/group/xap_automation/</a><br><br><*>
Your email settings:
<br> Individual Email
Traditional<br><br><*> To change settings online
go to:<br> <a href="http://groups.yahoo.com/group/xap_automation/join";>http://groups.yahoo.com/group/xap_automation/join</a><br> (Yahoo!
ID required)
<br><br><*> To change settings via
email:<br> mailto:<a
href="mailto:xap_automation-digest@xxxxxxx";>xap_automation-digest@xxxxxxx</a><br> mailto:<a
href="mailto:xap_automation-fullfeatured@xxxxxxx";>
xap_automation-fullfeatured@xxxxxxx</a><br><br><*>
To unsubscribe from this group, send an email
to:<br> <a href="mailto:xap_automation-unsubscribe@xxxxxxx";>xap_automation-unsubscribe@xxxxxxx
</a><br><br><*> Your use of Yahoo! Groups
is subject to:<br> <a
href="http://docs.yahoo.com/info/terms/";>http://docs.yahoo.com/info/terms/</a><br><br></blockquote></div><br>
<span width="1" style="color:
white;"/>__._,_.___</span>
<!-- **begin egp html banner** -->
<img src="http://geo.yahoo.com/serv?s=97476590/grpId=9674343/grpspId=1705007709/msgId=3762/stime=1191396137";
width="1" height="1"> <br>
<!-- **end egp html banner** -->
<!-- **begin egp html banner** -->
<br>
<div style="font-family: verdana; font-size: 77%; border-top: 1px
solid #666; padding: 5px 0;" >
Your email settings: Individual EmailTraditional <br>
<a href="http://groups.yahoo.com/group/xap_automation/join;_ylc=X3oDMTJmcGpqcWkwBF9TAzk3NDc2NTkwBGdycElkAzk2NzQzNDMEZ3Jwc3BJZAMxNzA1MDA3NzA5BHNlYwNmdHIEc2xrA3N0bmdzBHN0aW1lAzExOTEzOTYxMzc-";>Change
settings via the Web</a> (Yahoo! ID required) <br>
Change settings via email: <a href="mailto:xap_automation-digest@xxxxxxx?subject=Email
Delivery: Digest">Switch delivery to Daily Digest</a> <a
href = "mailto:xap_automation-fullfeatured@xxxxxxx?subject=Change
Delivery Format: Fully Featured">Switch to Fully Featured</a>
<br>
<a href="http://groups.yahoo.com/group/xap_automation;_ylc=X3oDMTJkMmhoODM0BF9TAzk3NDc2NTkwBGdycElkAzk2NzQzNDMEZ3Jwc3BJZAMxNzA1MDA3NzA5BHNlYwNmdHIEc2xrA2hwZgRzdGltZQMxMTkxMzk2MTM3";>
Visit Your Group
</a>
<a href="http://docs.yahoo.com/info/terms/";>
Yahoo! Groups Terms of Use
</a>
<a href="mailto:xap_automation-unsubscribe@xxxxxxx?subject=Unsubscribe";>
Unsubscribe
</a>
<br>
</div>
<br>
<!-- **end egp html banner** -->
<span style="color: white;"/>__,_._,___</span>
</body></html>
------=_Part_23956_652542.1191396132179--
xAP_Automation Main Index |
xAP_Automation Thread Index |
xAP_Automation Home |
Archives Home
|