[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Gigabit switch fan
Is the unit somewhere you can remove the lid? You may need to put some
card over the power supply for safety.
If you cant remove the lid then you will need to experiment with a
temperature probe inside the case with the fan
disabled. Most electronics are fine with an air temp. up to a least 50
degrees (sometimes 70+).
HTH
Stephen
On 26/01/13 14:33, Tim wrote:
>
> Hi, I just got a 16 port gigE switch from Ebay but the fan is a bit
noisy. I'm only going to use about half the ports,
> do you think it would be ok to disable the fan, or slow it down to
make the noise a bit less annoying?
>
> Tia
> Tim.
>
>
[Non-text portions of this message have been removed]
------------------------------------
<*> Join the Automated Home Forums
http://www.automatedhome.co.uk/vbulletin/
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|