RE: Fermax Entryphone Cameras

["Keith Doxey" <ukha@xxxxxxxxxxx>]

Try connecting a 75 ohm resistor across the input to the modulator.
Sounds
like the input to the modulator could be unterminated resulting in too high
a signal level.

Keith

> -----Original Message-----
> From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf
> Of peter_church
> Sent: 19 March 2010 09:15
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] Fermax Entryphone Cameras
>
> I've got a Fermax entryphone that will be hooked into Comfort but want
> to use the Camera in it as well.  Does anyone know if these should
kick
> out normal CCTV composite(?) signal, or are they something different
> designed to go through the standard Fermax phone/monitor units?
>
> I tried hooking the camera up to my UHF modulator and got a very
> extreme picture mostly black with white fringes around sharp edges, so
> am either thinking the signal is the wrong type or the camera is dud.
>
> Any ideas?
>
> thanks
>
> Pete
>
>
>
> ------------------------------------
>
>
> Yahoo! Groups Links
>
>
>



------------------------------------

<*> Join the Automated Home Forums
http://www.automatedhome.co.uk/vbulletin/