RE: New Boiler (with automation inclusion)

["Steve" <steve@xxxxxx>]

I like that. what software was used to produce the diagram









-------Original Message-------



From: Andrew Walker

Date: 15/01/2010 07:26:09

To: ukha_d@xxxxxxx

Subject: RE: [ukha_d] New Boiler (with automation inclusion)







I am looking at installing a new condensing modulating system boiler when
the kitchen extension is built in Feb and back of garage is converted to a
utility with boiler in there.



I have decided on a Viessmann Vitodens 200 with weather compensation and
also a little UFU.



There is an extension kit for this boiler which allows an external signal
to
switch the boiler from setback mode to heating mode.



We have quite unpredictable return home times so I plan to use my
HomeVision
or Comfort to call the house and enter the code to switch this signal. I do
this with the existing boiler/programmable thermostat and it works quite
nicely.



See my design here -> http://tinyurl.com/y93wtqz



-----Original Message-----

From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
Gareth Cook

Sent: 12 January 2010 17:07

To: ukha_d@xxxxxxx

Subject: [ukha_d] New Boiler (with automation inclusion)



Looking for ideas on what are options are : we have a 14 year old gas

boiler, pressurised C/H with standard water tank in an upstairs cupboard,

and vented cold water supply in the loft.



My understanding is that a combo for our house is not man enough, so

perhaps some sort of hybrid condensor or a Megaflow. Would be nice to have

full mains pressure water hot and cold throughout the house, and the

potential to boost from renewalable sources later on, and provide heat to

a water UFH (if I ever get round to it). I'll look to integrate this into

Comfort/CBUS (likely) or the Heatmiser (unlikely)



Any tips would be appreciated :-)



tia



Unless stated otherwise above:

IBM United Kingdom Limited - Registered in England and Wales with number

741598.

Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6 3AU



[Non-text portions of this message have been removed]



------------------------------------