The UK Home Automation Archive

Archive Home

Group Home

Search Archive
Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Filters for CFL lamps

Subject: Re: Filters for CFL lamps
From: Steve Morgan <steve@xxxxxxxxxxxxxx>
Date: Fri, 24 Dec 2010 22:50:09 +0000
References: <1F9DCC1B698A467BB640841144F43651@jimdesktop> <AANLkTincxCSk4kM1+St-tVudNvDr8YUB6H=5GMPZ21rm@xxxxxxxxxxxxxx> <C77477EC9CEE4A6CA8AD885E6E830CBF@jimdesktop>

  Jim,

Tamiya do a range of 'clear' acrylic paints for model making. They're
water based, so low hazard. About £1.50 from your local model shop.

Should do the job well enough, I think.

Cheers,
Steve

On 24/12/2010 22:00, Jim (List) wrote:
> Thanks for the tips, painting seems to be a good option and worth a
try!
>
> Any suggestions on the type of paint, as I'm thinking it would need to
be a
> transparent coloured lacquer or similar, that would also stand the
heat?
>
>
>
> Jim




------------------------------------

<*> Join the Automated Home Forums
http://www.automatedhome.co.uk/vbulletin/

References:
- Filters for CFL lamps
  - From: Jim \(List\)
- Re: Filters for CFL lamps
  - From: Nick Austin
- RE: Filters for CFL lamps
  - From: Jim \(List\)

Prev by Message: RE: Filters for CFL lamps
Next by Message: Re: Filters for CFL lamps
Previous by thread: RE: Filters for CFL lamps
Next by thread: Re: Filters for CFL lamps
Index(es):
- Message
- Thread

UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.