Re: SC9000 X10 Security Console PSU failures. Anyone else?

["Rob Iles" <rob.iles@xxxxxxxxx>]

I've heard from "someone who knows" that the PSUs are a
known weak-point.

solution: replace PSU :(

Sorry!

R

2009/1/8 David Brown <daveb81@xxxxxxx>

>   Hi all
>
> I have had installed a Marmitek SC9000 security console for a few
years now
> and finally got round to using the X10 side of it last spring (2008).
I
> couldn't get the consoles X10 signals to work with any devices. After
a lot
> of playing around, I found out from Simply Automate (where I bought it
> from)
> that it could be the power supply at fault. They agreed to replace it
for
> free which cured the problem. I have not used the X10 much since then
until
> a few weeks ago. The console wont control the X10 devices again and
now the
> siren wont sound when the alarm is triggered. I have checked that all
the
> settings are correct but the siren never sounds. I'm guessing the
power
> supply is playing up again and will get back in contact with Simply
> Automate. The alarm may be at fault this time although it does ring
out
> when
> triggered. I don't suppose others here are using the same device and
are
> having the same or similar problems?
>
> Cheers.
>
> [Non-text portions of this message have been removed]
>
>
>



--
Rob Iles

Harmony - www.domialifestyle.com
Software Development - www.rob-iles.co.uk/rmidevelopment

Twitter: http://twitter.com/Rob_Iles
Skype: rob_iles
12seconds: http://12seconds.tv/channel/rmi


[Non-text portions of this message have been removed]


------------------------------------