Re: Fw: Adding CCTV

[Marc Fuller <groups@xxxxxxxxxxxxxxxxxx>]

I did some contract work for a large construction company. Adding CCTV
to one of their sites. They asked for the bloody lot! About 30k worth of
cctv equipment. We based the lot off of Geovision.

They had a Net I/O card, inputs detecting PIR movement and moving PTZ
cameras to focus on the PIR area. Outputs switching on perimeter lighting.

Was truly enjoyable installing and setting up and seeing Geovision
handle it all so well. The latest Geovision software has a bloody option
for everything! Love it !

The only thing they didn't do was the ANPR.. they thought about it
though and we priced it up.. they just thought it was a bit extravagant
for a building site. I loved the thought of getting Geovision to
interact with the ANPR.. opening the automatic gate, recording incoming
plates etc.

Cheers

Marc

Note: I don't work for Geovision :D



Paul Gordon wrote:
>
>
> That's the puppy I'm planning to add... primarily to go the other way,
> i.e. to get GV telling comfort when motion is detected etc.
> Last time I looked, these were pretty inexpensive too... :-)
>
> Paul G.
>
>  > -----Original Message-----
>  > From: ukha_d@xxxxxxx <mailto:ukha_d%40yahoogroups.com>
> [mailto:ukha_d@xxxxxxx <mailto:ukha_d%40yahoogroups.com>]
On Behalf
>  > Of Marc Fuller
>  > Sent: 05 February 2009 10:57
>  > To: UKHA Group
>  > Subject: Re: Fw: [ukha_d] Adding CCTV
>  >
>  > That can be done with the Geovision system too, just add a
NetI/O card
>  > and away you go :D
>  >
>  > Cheers
>  >
>  > Marc
>  >
>  > Gareth Cook wrote:
>  > >
>  > >
>  > > Something I'd be interested in - the abilty to start
'recording' via
>  > a
>  > > Comfort output would be preferable.
>  > >
>  > > Gareth Cook MBCS CITP
>  > > Technical Solution Architect, SWG Sales Europe
>  > >
>  > > ----- Forwarded by Gareth Cook/UK/IBM on 05/02/2009 10:45
-----
>  > >
>  > > Discussion
>  > > Main Topic
>  > >
>  > > ukha_d@xxxxxxx <mailto:ukha_d%40yahoogroups.com>
> <mailto:ukha_d%40yahoogroups.com>
>  > > Today 10:10
>  > >
>  > > .
>  > > Subject:
>  > > .
>  > > [ukha_d] Adding CCTV
>  > > .
>  > > Category:
>  > >
>  > > All
>  > >
>  > > As you have read I have decided to go down the
cbus/comfort/sonos
> and
>  > > possibly
>  > > homeseer route for my HA system. Things are progressing
well but
>  > slowly.
>  > >
>  > > Now I had thought about CCTV in the past but was never sure
but this
>  > > morning I found a
>  > > site that has made me rethink http://www.bwired.nl/Doorimages.asp
> <http://www.bwired.nl/Doorimages.asp>
>  > > <http://www.bwired.nl/Doorimages.asp
> <http://www.bwired.nl/Doorimages.asp>>
>  > >
>  > > There is a camera at the front door that is linked to the
doorbell
>  > and
>  > > also the contact
>  > > sensor on the door.
>  > >
>  > > So it takes a picture and gives the following readout
>  > >
>  > > Doorbell pushed On Saturday 31 January 2009 - 19:57:42
>  > > Door Opened On 19:57:53  After 11 Seconds  For 8 Seconds
>  > >
>  > > Now the system to do this is home written so is not an
option for
> me.
>  > >
>  > > Has anyone got anything similar working
>  > >
>  > > Action : Comfort Doorbell pressed
>  > > Response : Camera turns on and records for 2 min or until
door is
>  > opened
>  > > and closed.
>  > >
>  > > Any help or pointers appreciated.
>  > >
>  > > Ben
>  > >
>  > > ------------------------------------
>  > >
>  > > Yahoo! Groups Links
>  > >
>  > > Unless stated otherwise above:
>  > > IBM United Kingdom Limited - Registered in England and
Wales with
>  > number
>  > > 741598.
>  > > Registered office: PO Box 41, North Harbour, Portsmouth,
Hampshire
>  > PO6 3AU
>  > >
>  > > [Non-text portions of this message have been removed]
>  > >
>  > >
>  >
>  >
>  >
>  > ------------------------------------
>  >
>  > Yahoo! Groups Links
>  >
>  >
>  >
>
>



------------------------------------