Re: Fw: Adding CCTV

[Marc Fuller <groups@xxxxxxxxxxxxxxxxxx>]

That can be done with the Geovision system too, just add a NetI/O card
and away you go :D

Cheers

Marc

Gareth Cook wrote:
>
>
> Something I'd be interested in - the abilty to start 'recording' via a
> Comfort output would be preferable.
>
> Gareth Cook MBCS CITP
> Technical Solution Architect, SWG Sales Europe
>
> ----- Forwarded by Gareth Cook/UK/IBM on 05/02/2009 10:45 -----
>
> Discussion
> Main Topic
>
> ukha_d@xxxxxxx <mailto:ukha_d%40yahoogroups.com>
> Today 10:10
>
> .
> Subject:
> .
> [ukha_d] Adding CCTV
> .
> Category:
>
> All
>
> As you have read I have decided to go down the cbus/comfort/sonos and
> possibly
> homeseer route for my HA system. Things are progressing well but
slowly.
>
> Now I had thought about CCTV in the past but was never sure but this
> morning I found a
> site that has made me rethink http://www.bwired.nl/Doorimages.asp
> <http://www.bwired.nl/Doorimages.asp>
>
> There is a camera at the front door that is linked to the doorbell and
> also the contact
> sensor on the door.
>
> So it takes a picture and gives the following readout
>
> Doorbell pushed On Saturday 31 January 2009 - 19:57:42
> Door Opened On 19:57:53  After 11 Seconds  For 8 Seconds
>
> Now the system to do this is home written so is not an option for me.
>
> Has anyone got anything similar working
>
> Action : Comfort Doorbell pressed
> Response : Camera turns on and records for 2 min or until door is
opened
> and closed.
>
> Any help or pointers appreciated.
>
> Ben
>
> ------------------------------------
>
> Yahoo! Groups Links
>
> Unless stated otherwise above:
> IBM United Kingdom Limited - Registered in England and Wales with
number
> 741598.
> Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6
3AU
>
> [Non-text portions of this message have been removed]
>
>



------------------------------------