The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Lantronix MSS100 Serial Server


  • Subject: Re: Lantronix MSS100 Serial Server
  • From: "rb_ziggy" <rb.lists@xxxxxxxxxxxx>
  • Date: Mon, 22 Sep 2008 17:14:17 -0000

I also use these and had a couple that I thought had 'just died'.
Turned out that the configuration had got 'scrambled' (possibly due to
power glitch).  May be worth checking the dead ones - took me a while
to figure it out!

Possibly not the cause of the 'intermittant' fault though.

--- In ukha_d@xxxxxxx, "Frank Mc Alinden" <frankmc@...>
wrote:
>
> Hi Marc
>
> I use a few of the mss100 devices.....Recently i had trouble with
the one
> connected to my  Homevision device it turned out to be my
switch...... i
> also was having issues with medianet/exstreamer and whilst trying to
fix
> this issue i realised the switch was causing my mss100 issue.....So
if your
> not having any issues whatsoever with other devices on the same
switch its
> probably something else....I have a couple of units which have just
died...
>
> Frank
>
>
> ----- Original Message -----
> From: "Marc Fuller" <groups@...>
> To: "UKHA" <ukha_d@xxxxxxx>
> Sent: Monday, September 22, 2008 6:05 PM
> Subject: [ukha_d] Lantronix MSS100 Serial Server
>
>
> > Hey Guys,
> >
> > I seem to remember a few on this list had these devices. Mine has
been
> > running perfectly for a few years now but has suddenly started
playing
> > up. Maybe someone here had a similar problem? I also believe
Laser
> > (where I bought it from) are on this list and may have an idea?
> >
> > Basically it is crashing 2 to 3 times a day. It'll work perfectly
> > between crashes, but then will just stop responding. No ping will
get
> > through to it and the http interface is dead. Other network
devices on
> > the same switch are fine so I'm sure it's not a Ethernet issue.
> >
> > The only way to get it back online is to physically turn it off
and on
> > again. Then it goes back to functioning correctly until the next
crash.
> >
> > It's running Version V3.6/9(030114) Firmware and is being used by
> > Homeseer for a remote CM12.
> >
> > Any advise appreciated.
> >
> > Cheers
> >
> > Marc
> >
> >
> > ------------------------------------
> >
> > **** Sponsored By http://www.Berble.com ****
> > ****       Computers You Carry          ****
> >
> >
> >
> >
> >
> >
>



------------------------------------


UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.