The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: dimmable CFL


  • Subject: Re: dimmable CFL
  • From: "wywywywywywywywywywy" <wywywywy@xxxxxxxxxxx>
  • Date: Thu, 04 Oct 2007 07:50:20 -0000

Hi,

Kevin Lo's 3-wire modules don't have a minimum load :D
Unfortunately I use his 2-wire modules... which has a 40w min load,
but still not too bad I think.

On the other hand, Osram have recently introduced a series of halogen
energy saving lamps offering up to 33% extra brightness. Basically
they just filled the bulbs with xenon gas (yes, the same technique
used on car bulbs for years... don't know why they didn't do it
sooner) so this new 40w halogen GU10 bulb is going to be as bright as
a normal 50w one, as far as I understand. Obviously being halogen it
is not going to be too expensive either.

http://www.osram.com/osram_com/Consumer/Home_Lighting/Halogen_lamps/Product_overview/Plug-in_bases/ENERGY_SAVER_/HALOPAR_16_ENERGY_SAVER/index.html

If the Varilight stuff turns out to be no good, I will probably go the
Osram route - saving just a little bit of energy is better than not
saving any at all.

Thanks,
Wayne



--- In ukha_d@xxxxxxx, Mark Hindess <ukha@...> wrote:
>
>
> On 2 October 2007 at 15:49, "wywywywywywywywywywy"
> <wywywywy@...> wrote:
> > Hi,
> >
> > I have also been waiting for these since about 6 months ago.  And
> > since last week they are finally available :D
> >
> > But do they REALLY work with a normal dimmer switch (and hence HA
> > systems) though?
>
> Well, I think most people are going to have the same issue as me.  I
> have lots of lighting on LD11s.  These can be used with bulbs of 60W
or
> more.  Most of the circuits I have have only a single 60W/100W bulb. 
If
> I replace these with a Varilight Dimmable bulb which is only 20W then
> it isn't going to work.  So unless you have circuits with 3+ bulbs
then
> these aren't going to work for you.
>
> I have no idea what the solution is to this problem but I'm sure
clever
> people that recommended our country phase out normal bulbs will
provide
> us with a solution, wont they?
>
> > Because the Megaman one claims that it does, but in reality you
have
> > to flick it off and on, which isn't very good on a HA system. So
I am
> > hoping the Varilight one is not like the Megaman one.
>
> The Varilight Switch Dimmable ones, which have been available for
ages,
> are like the Megaman one you describe.  The Varilight Dimmable ones
are
> suppose to just work ... but of course they wont because you'll just
> damage your dimmer module.
>
> Regards,
>  Mark.
>





UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.