The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Simat 1 wire Hubs



Hi Jon

>now I'm thinking that it slows down the 1-wire network too much for my
>purposes.

Yeah i noticed that the branches get polled.....Im going to put moisture
sensors and any outdoor temp sensors on the Hub  and my Ibuttons on the
main
trunk along with the lcd that i have just ordered.. Dont for get though Jon
it take approx 700mSEC to read a dallas temp sensor this delay is not due
to
the HUB.....Luckily my room temp sensors connect to my Probe system so that
will reduce the scan time a bit.....I,ll have  a play with the lcd
connected
to the HUB to see what sort of delays i get.......

Frank


----- Original Message -----
From: "Jon Payne" <jgpayne@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Monday, May 21, 2007 10:08 PM
Subject: Re: [ukha_d] Simat 1 wire Hubs


> Yep, same as you really I dusted it off about 1 year ago... now I'm
> thinking that it slows down the 1-wire network too much for my
purposes.
> With a couple of LCDs, a few ibutons, DS2406's, and about 8
temperature
> sensors it takes 10 seconds to scan for the presence of devices on the
> network, during which the network is locked out, before I've even
polled
> existing devices: about 20 seconds for temperature sensors (with most
on
> the same branch). This means for example a message needing to be
displayed
> on an LCD is delayed for too long.
>
> ----- Original Message ----
> From: Frank Mc Alinden <frankmc@xxxxxxx>
> To: ukha_d@xxxxxxx
> Sent: Monday, 21 May, 2007 12:30:04 PM
> Subject: [ukha_d] Simat 1 wire Hubs
>
>
> Hi Guys
>
> Just got round to trying out my  Simat 1 wire hubs...Cant believe they
> have
> been gathering dust that long  i think  that  we  had a bulk buy back
> around
> July/sept  2002 ;-)...
> Anyone on the list who got one using theirs ;-)
>
> Frank
> www.armaghelectrical.com.au
>
>
>
>
>
>
>
>
>
>



UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.