The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: Problems using multiple Digiboxes on 1 x LNB


  • Subject: RE: Problems using multiple Digiboxes on 1 x LNB
  • From: "Nigel Giddings" <nigel@xxxxxxxxxxxxxx>
  • Date: Mon, 23 Apr 2007 09:36:46 +0100

Unfortunately you cannot connect multiple satellite receivers to a
single L=
NB output.

=20

The receivers send commands to the LNB to select Band and Polarization
with=
the use of tones and voltages. Two receivers will interfere with each othe=
rs requests and you=92ll end up very confused.

=20

You need an LNB which can provide multiple outputs, 2, 4 or now even 8.
Eff=
ectively these are separate LNBs in the same device. You will need a
separa=
te coax for each connection=85

=20

There are also other methods of distributing the signals from 1 dish / 4
wa=
y LNB to many many receivers but I don=92t think you need this.

=20

HTH

=20

Nigel

=20

-----Original Message-----
From: noughtomate [mailto:balraj_jassal@xxxxxxx]=20
Sent: 23 April 2007 09:10
To: ukha_d@xxxxxxx
Subject: [ukha_d] Problems using multiple Digiboxes on 1 x LNB

=20

Hi all,=20

Is it possible to use a single LNB feed across different Digiboxes=20
(Sky and Freesat)?

I've been a Sky Digital user for a while now but I recently purchased=20
a Pace DS810 HD box thinking it was a Freeview box (Ebay purchase!)

On arrival I actually found out that the Pace DS810 uses a Satelitte=20
input (so it's Freesat instead of Freeview), so I've cabled it as=20
follows :=20

Dish LNB -> Pace Freesat Input -> Pace Freesat Output -> Sky
Digital=20
Digibox

But I find now that Sky only works if the Pace DS810 box is switched=20
off. Basically if DS810 Freesat is switched on, most of the Sky=20
channels say 'No Satlitte be signal being received'.=20

I imagine this is my own misunderstanding about how satelitte services=20
work.=20
I expected that a single Dish input could be used for multiple=20
receivers, in the same way as Terrestrial over Coax.=20

Have I got this wrong ?

The workaround I thought up to this was to use some type of F-
Connector Y plug to split the Satelitte feed. Is this correct, or=20
would I have to install a second LNB, so each Digibox has a decicated=20
feed ?

Any advice would be appreciated. I'm sure I could ask the same=20
question in some satelitte forum, but I'm sure there must be a few=20
people here who are more than familiar with Satelitte services!

Thanks in advance.=20

=20


No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.463 / Virus Database: 269.5.9/773 - Release Date: 22/04/2007
2=
0:18



No virus found in this outgoing message.
Checked by AVG Free Edition.=20
Version: 7.5.463 / Virus Database: 269.5.9/773 - Release Date: 22/04/2007
2=
0:18
=20


[Non-text portions of this message have been removed]




UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.