[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
MCE with Blackgold Tuner and 100% CPU
- Subject: MCE with Blackgold Tuner and 100% CPU
- From: "Tim Fletcher" <timfletcher@xxxxxxxxxxx>
- Date: Thu, 30 Nov 2006 09:28:00 -0000
Hi,
just migrated an MCE box from my excellent Hauppauge PVR350 to a Blackgold
DVB-T Tuner and all looked OK, but the CPU was constantly at 100%. I
figured it must be some sort of driver problem, so after a lot of messing
around I finally reformatted the drive and did a vanilla install. Only to
find I have the same problem.
Typically all starts OK, but after a few minutes of MCE running the CPU
lights up and stays at 100% until a reboot. The WMplayer seems to be the
process and it gradually swells in size until it has absorbed all the
available RAM. Very annoying.
Any Ideas?
Tim.
[Non-text portions of this message have been removed]
** Sponsored by http://www.BERBLE.com **
all the Cool Stuff, in one Place
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|