The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: Anyone UPS's Home Cinema stuff


  • Subject: RE: Anyone UPS's Home Cinema stuff
  • From: "Dean Barrett" <dean@xxxxxxxxx>
  • Date: Wed, 10 May 2006 08:30:07 +0100

Nigel
=20
Must admit i'm looking at the self resetting RCD purely from a personal
angle at present and agree there could be times someone may believe a
circuit is dead - though i'm assuming if a fault occurs its check to see if
its clear and then resets - if the fault lasts longer than milliseconds i
guess it wont reset, as this would indicate a man and a pickaxe still stuck
in the cable etc.
=20
Dont know for sure but will find out when i get one - i've now been
informe=
d
they are not in the UK yet, but we will be getting one of the first ones to
try (on my house of course). I'll keep you posted when i've tried it out.
=20
I can see a lot of benefits to nuisance tripping problems, and i'm sure if
its 100% safe it could catch on - especially as some developers are going
for 100% RCD coverage of the mains boards rather than split, thus
increasin=
g
nuisance tripping with lamp failures sometimes taking out RCD's etc.
=20

Dean.


_____=20=20

From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
Nigel Giddings
Sent: 08 May 2006 20:44
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Anyone UPS's Home Cinema stuff


Dean,

I think it makes a lot of sense to put such devices on a UPS. The main
advantage being that you will remove brownouts and sudden on-off-on
transitions.=20

If your not looking for cover during an extended outage, which could be
several hours, then enough capacity to allow a controlled shutdown in
software would suffice...

As with most things bigger is better, your limiting factor will be
accommodation. Look for a second hand unit that can shut down the PC with a
serial or USB interface (10 minutes should be ample, you could delay for an
additional 15 minutes to cover 90% of outages) something between 1 or 2
KVA...

Interested to see you mention the self resetting RCD. I fist saw these used
in Spain for remote sites which suffered from lighting strikes. My concern
would be Circuits energising automatically if someone thought it
dead/isolated...

Nigel

-----Original Message-----
From: Dean Barrett [mailto:dean@xxxxxxx]=20
Sent: 08 May 2006 14:01
To: ukha_d@xxxxxxx
Subject: [ukha_d] Anyone UPS's Home Cinema stuff



Due to increasingly regular powercuts in our village (the last one
knackere=
d
my HTPC) - i was thinking about putting a UPS on DVD/Sky+/Amp/HTPC setup.

Is anyone doing the same - if so what size UPS does the job.

I'm just thinking of about 15 mins of uptime which will usually overcome
th=
e
worst outages - but makes sure everything is in sync when SWMBO next goes
t=
o
use it all :)

I'm also about to try out a self resetting RCD if anyone is interested - we
get tripping when v.windy (overhead supply), and i've stumbled across an
RC=
D
than when tripped checks if all circuits are clear, and then resets itself
!!



Dean.




Talk for free - skype me  <skype:dean.rolec?call> Call me!

Try our amazing lighting demonstration online now, and watch in realtime
vi=
a
our webcam. Click below and follow the CBus links.
<http://www.rolec.net/> www.rolec.net
dean@xxxxxxx
Tel: 01908-210677
Fax: 01908-210678

The information in this internet E-mail is confidential and is intended
solely for the addressee. Access, copying or re-use of information in it by
anyone else is unauthorised. Any views or opinions presented are solely
those of the author and do not necessarily represent those of The Rolec
Group or any of its affiliates. If you are not the intended recipient
pleas=
e
contact wrongmail@xxxxxxx




[Non-text portions of this message have been removed]






UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.