The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: [OT] New motherboard questions


  • Subject: RE: [OT] New motherboard questions
  • From: "Keith Doxey" <ukha@xxxxxxxxxxx>
  • Date: Mon, 1 May 2006 18:52:17 +0100

Thanks Jim

> Those Grandtec cards are way overpriced for what you get. You could
have
> a quad BT878 card off ebay for what a single BT878 grandtec costs (and
> thus >4x the frame capture rate)
>

Will take a look. CPC are selling the GrandX for £20 and the USB
version for
£30

> >I am also confused by AGP slots. Are these backwards compatable ?
> >eg could a new mobo with a AGP 8x take the existing AGP graphics
card ?
>
> Yes, and no. Older standards use higher voltages, so not all newer
> motherboard can use old cards. There's also AGP Pro to complicate
> matters further.
> http://en.wikipedia.org/wiki/Accelerated_Graphics_Port
>
> You might want to consider buying motherboard with PCI Express though.
> At least for the graphics card (a mixture of PCIe and PCI would be
> useful for the frame grabbers of course!). New AGP gfx cards a getting
> thin on the ground, although there's still plenty of old model stock.
> Non-graphics PCIe cards are still less prevalent though.

I was hoping to use a twin head AGP card that I have laying around. Will
have to do some looking around.

Keith




UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.