RE: Re: kx drivers & sound card recommendations

["Paul Gale" <groups@xxxxxxxxxxxxxxxx>]

No not definite - I have 5 stereo pairs showing up in the
windows/application control panels. 3 definitely work individually as I'v
just checked them. One of the other outputs seems to map on top of the
other though - so maybe there is a limit of 3?

The card is an SB0240 (Audigy 2 Platinum). It was a long time ago that I
played with it and I have swapped cards over since then - From the
supported cards list on the kx site, this is actually a 6.1 card.

This guide shows that it should be possible to get all 4 outputs though:

http://kxproject.lugosoft.com/qguide.php?language=en

What was the post that mentioned the problems?

Paul.



> -----Original Message-----
> From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
> Tim Hawes
> Sent: 13 July 2006 13:10
> To: ukha_d@xxxxxxx
> Subject: Re: [ukha_d] Re: kx drivers & sound card recommendations
>
> Thanks Paul,
>
> So that's a "for definite" that it works for 4 independent
zones?
> (sorry to labour the point but there seems to be a bit of
confusion...)
>
> Cheers,
>
> Tim.
>
> On 7/13/06, Paul Gale <groups@xxxxxxx> wrote:
> > It CAN be very complex - but for simple 4 channel support - all
you need
> to do is install the drivers, set the surrounder option in the DSP to
7.1
> direct path and save the config - that's all there is to do!
> >
> > Of course, if you want to manually route the signals through the
DSP,
> you can do and things start getting a little more complex!
> >
> > Paul.
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>