[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Re: CBus PAC Programming
> you use Cbus group addresses to trigger things in the PAC, but
you
> dont have to have an actual relay or dimmer channel, just a CBUS
> group, so f.e. you can make up a group name assign it to a key and
> then have the PAC listen to that group name, and do something
> with out the relay or dimmers beeing involved
It's also known as "virtual groups" - you define a group in
Toolkit and
allocate it to a switch but don't allocate it to an output device. Instead
you use that virtual group to trigger the actions in the PAC.
Phil
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|