RE: Electricity monitoring (again!) - Electrisave ??

["Jonathan Hall" <jonathan@xxxxxxxxxxxxxxxxx>]

I asked the makers a while back when a version would be available to
log to
a PC and they said that V2 will be out in 2007.



Cheers

Jonathan





_____

From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
Marcus Warrington
Sent: 14 August 2006 11:23
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Electricity monitoring (again!) - Electrisave ??



Got one myself when there was the money off offer around, it works OK,
but AFAIK its a
closed system (I believe they were looking at bring out a version that
did interface to a PC)

It also doesn't do an instant reading, i.e. it only updates every 3-4
seconds or so. This can make it
a little difficult to see what the effect of doing something (like
turning off/on a light etc) has had.

Generally I have it at the side of the bed as a check that everything is
turned off.. i.e. its it says
anything greater than 5p an hour being used then something extra has
been left on.

Being able to log the data would make it MUCH better.. anyone want to
build an RF to xAP bridge :)

Marcus


-----Original Message-----
From: ukha_d@yahoogroups. <mailto:ukha_d%40yahoogroups.com>
com
[mailto:ukha_d@yahoogroups. <mailto:ukha_d%40yahoogroups.com>
com] On
Behalf Of Paul Gale
Sent: 13 August 2006 10:22
To: ukha_d@yahoogroups. <mailto:ukha_d%40yahoogroups.com>
com
Subject: RE: [ukha_d] Electricity monitoring (again!) -
Electrisave ??



There was lots of talk here 5-6 months ago about this - I have
one of them but it doesn't support any other interface unless someone
managed to hack it?

There was talk about other devices which were more likely to
work but I don't know what the outcome was - maybe try a search of the
postings?

Paul.

> -----Original Message-----
> From: ukha_d@yahoogroups. <mailto:ukha_d%40yahoogroups.com>
com
<mailto:ukha_d%40yahoogroups.com>
[mailto:ukha_d@yahoogroups. <mailto:ukha_d%40yahoogroups.com>
com
<mailto:ukha_d%40yahoogroups.com>
] On
Behalf Of
> kw1816
> Sent: 13 August 2006 10:08
> To: ukha_d@yahoogroups. <mailto:ukha_d%40yahoogroups.com>
com
<mailto:ukha_d%40yahoogroups.com>
> Subject: [ukha_d] Electricity monitoring (again!) -
Electrisave ??
>
> Anybody know anything about Electrisave
http://www.electris
<http://www.electrisave.co.uk/>
ave.co.uk/
<http://www.electris
<http://www.electrisave.co.uk/>
ave.co.uk/> ?
> Nice little product but would be even nicer if I could get the
data
> into Homeseer :-)
>
> It doesn't look like the receiver has any sort of interface
and not
> knowing much about RF protocols etc. Any way to intercept the
RF data
> by another type of receiver and get the raw data into a PC ??
>
> Kevin W.
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>





[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]