[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Re: CBus???
Great - so with a bit of re-wiring, I could swap out just the LD11's
for CBus dimmers and add a few DLT's?
What exactly would I need? i.e. the dimmer units and....?
Paul.
> -----Original Message-----
> From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
> Phil Harris
> Sent: 09 August 2006 16:00
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] Re: CBus???
>
>
> > What's the limitation on the aux inputs? Do they allow
> > dimming and on/off just like X10 LD11's?
> >
> > Paul.
>
> The input channels on the AUX input units are opto-isolated from the
C-Bus
> side of the circuitry (which is not the case in the Bus Couplers) and
> hence
> the cable runs to the inputs of the AUX input units don't count
towards
> the
> total C-Bus network length.
>
> Both the AUX input units and the Bus Couplers can be used to give you
the
> same functionality that you had on your LD11's (i.e. click on/off and
> press-and-hold to adjust brightness).
>
> Phil
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|