[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Heatmiser Central Heating Thermostat
- Subject: RE: Heatmiser Central Heating Thermostat
- From: "Craig" <lists@xxxxxxxxxxxxxx>
- Date: Fri, 11 Nov 2005 15:22:24 -0000
> I will report back to the list when I've heared from Logitech.
>
Good news & possibly bad news.
Do you plan to use the HW feature?
I have tested the harmony OK, but during testing I found a snag.
The genuine remote maintains 'state' ie temp, and hw timers. The genuine
remote has a lcd display showing the state, and transmits this 'state'
to the Heatmiser controller when either temp- or temp+ button is
pressed.
I created 13 buttons, Temp18 ... Temp30, with HW timer off.
If you use HW feature, then when you change temp with the harmony codes
I created it will turn HW timer off.
Im not sure of a way around this, unless the state is a series of IR
commands, and the offending HW IR commands are removed?
I don't use the HW feature, so this 'feature' of the IR codes I created
does not affect me.
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|