Re: [OT] Voip phone setup ??

["marcus_warrington" <marcusw@xxxxxxxxxxx>]

Patrick

You are correct that I am using a router (Draytek 2600plus) although
I don't have the firewall enabled , just NAT.

I have no idea if the Vigour is stun aware, but I have already
forwarded the (sipgate) suggested port to the phone IP
(192.168.0.50) without success.

I haven't tried telling the phone the WAN address.. I'll try later.

Unfortuantley the degug trace is as verbose as the phone generates..
I've tried googling but found nothing as yet.

Thanks

Marcus

--- In ukha_d@xxxxxxx, "Patrick Lidstone" <patrick@l...>
wrote:
>
> --- In ukha_d@xxxxxxx, "Marcus Warrington"
<marcusw@m...>
wrote:
> >
> > Anybody know anything about setting up a voip phone (IPTALK203a)
> > to sipgate ?
> >
> > I'm pulling my hair out here !
> >
> > This is the debug trace from the phone... anyone have any ideas ?
>
> Can't help with the specifics of your set up, but some generic
advice:
>
> - It looks like your phone is behind a firewall on a private
network.
> Is your router stun aware? If not you will need to port forward
ports
> 5600 and the rtp media ports used by your phone to the phone, and
you
> may need to tell the phone the public IP address of your router so
it
> can munge the SIP packets.
>
> - It looks like registration with sipgate is failing. This could be
> due to failed account credentials (wrong password or user id etc),
or
> it could also be due to firewall config (one half of the
registration
> step is getting lost). There's not enough info in your logs to tell
> one way or the other.
>
> If you haven't already, try googling for the model number of your
> phone + well-known-providers for further clues - they all work
more or
> less the same way.
>
> HTH
> Patrick
>