The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: CCTV camera



It should be possible to disable the IR LED's on the camera - either by
masking them with some opaque insulating tape/paint or by removing the
power to them - (aka snipping one lead or the whole thing off) .  You
may even be able to fool the night sensor into thinking it's day if that
holds the LED's off. However night performance of cheaper cameras is
usually quite poor - and very sensitive units cost very sensitive
prices. If you have a well lit scene it may be adequate of course.

K

;-)steamer2uk wrote:

>Hi everyone.
>I have question about CCTV: Is it possible to get round the problem
>of the automatic IR (at night) on a CCTV camera?
>The reason I ask is because I want to have a camera inside my double
>glazed window, but the IR beam at night floods the lens because of
>reflection from the glass.
>I would be happy to have a camera that doesn't have IR facility,
>but can't find a small one with good resolution at a price to match
>the IR equipped ones.
>Any suggestions greatly appreciated.
>Cheers
>Chris
>(I'm not very `up' with all the hi-tech stuff that's discussed but
>I've been watching for a while and, hopefully, learning.)
>
>
>
>




UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.