The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: X10 wired PIR



As far as I know, there are no wired X10 PIR's.

What you can do is to have a normal PIR (normally open) with a X10
powerflash module (http://www.letsautomate.com/10258.cfm?)

The PIR detects movement and closes the contacts.. the powerflash module
detects this closure and sends on an X10 signal.

Cheers

Marc


________________________________

From: ukha_d@xxxxxxx on behalf of egelbeertje
Sent: Thu 26/05/2005 15:12
To: ukha_d@xxxxxxx
Subject: [ukha_d] X10 wired PIR



Hi, using the wireless x10 sensors causes too much delay for my liking,
anybody know if they can be converted to 230v or knows a source of
wired PIR's with same specs as the wireless ones.

rgds Rob







UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.