[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: How do you (really) get 3 stereo pairs from one soundcard?
- Subject: RE: How do you (really) get 3 stereo pairs from one
soundcard?
- From: "Paul Gale" <groups@xxxxxxxxxxxxxxxx>
- Date: Thu, 26 May 2005 09:03:44 +0100
I had the same problem - just shaved of some of the plastic both sides from
the centre plug and one side from the outside plugs. Plently of plastic to
play with.
Worked fine for me.
Paul.
> -----Original Message-----
> From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
> rb_ziggy
> Sent: 26 May 2005 00:13
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] How do you (really) get 3 stereo pairs from one
> soundcard?
>
> A while back there were discussions about using KX Project drivers to
> get 3 stereo pairs from one soundblaster audigy card. Well I've done
> that and have,currently, 2 pairs feeding into my multiroom amp.
>
> Only problem is... I bought 3 pairs of QED 3.5mm jack to 2 phono
> interconnects. Fine except that the 3.5mm jack plug barrel is pretty
> wide and 3 will not fit next to each other into the soundcards outputs
> (not enough space between the card outputs to allow for the width of
> the plug barrels side-by-side). So I have 2 pluged into alternate
> holes with the middle one effectively out of commission. Argh!
>
> I know others of you do something similar or even use 5/7.1 outputs
> so... what (reasonably decent quality) slim barreled interconnects do
> you use (and where do you get them)?
>
> Ta
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|