The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: Single gang 4 port RJ45 outlet


  • Subject: RE: Single gang 4 port RJ45 outlet
  • From: "Keith Doxey" <ukha@xxxxxxxxxxx>
  • Date: Wed, 11 May 2005 13:39:08 +0100

Rapid Electronics

www.rapidelectronics.co.uk

19-8340 4-port shuttered plate  1+ £1.96  10+ £1.86  50+ £1.74
19-8342 UTP dual punch down jack 1+ £1.32 10+ £1.20  50+ £1.12

So a 4 port faaceplate is 4 * 1.32 = 5.28 + 1.96 = 7.24

And thats only of you build one up.

26 would be

Faceplates 26 * 1.86  = 48.36
Sockets    102 * 1.12 = 114.24

Total = 162.60

which works out at £6.26 per faceplate + vat

*** YOU NEED A DEEP BACKBOX AS SPACE IS VERY TIGHT *** !!!!!

HTH

Keith

> -----Original Message-----
> From: big_red_748 [mailto:john_macnamara@xxxxxxx]
> Sent: 11 May 2005 13:13
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] Single gang 4 port RJ45 outlet
>
>
>
> I am looking for 26 x single gang 4 port RJ45 outlets but the cheapest
> I can find them is at £10.95 + VAT at http://www.videkonline.co.uk/
>
> Does anyone have a source that is cheaper?
>
> The reason for the single gang rather than the 2 gang is to cut down
on
> the wall clutter!
>
> Cheers,
>
>
> John
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>




UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.