RE: [OT] 2.5 to 3.5 ide adapter problem

["michael.furlong" <ukha@xxxxxxxxxxxxxxx>]

Richard,

thanks for the help, the belkin doesn't have any visible circuitry so it
was
a bit trickier to work out but I found the right pin and it is working fine
now.

Cheers
Mick
-----Original Message-----
From: Richard Malcolm-Smith [mailto:rich@xxxxxxx]
Sent: 11 March 2005 10:17
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] [OT] 2.5 to 3.5 ide adapter problem


michael.furlong wrote:

> Sorry for the OT post but I know people on the group have used these
> and may know the answer.
>
> I have a Belking 2.5 3.5 ide adapter...connecteded it up to the
> notebook drive I am trying to recover data from but when I go to plug
> it into the 3.5 ide cable it is not keyed (i.e. it doesn't have a pin
> missing). Any thoughts ideas or suggestions? I could just snip a pain
> but am a bit concerned about snipping the wrong one. The Belkin part
> no is F2N511.

Had the same issue, I just bent it out of the way. Was a unbranded adaptor
tho.
The pin was the one where the solder pad went nowhere on the board to hard
to
mess up


[Non-text portions of this message have been removed]