Re: node0 RF interference

["egelbeertje" <r_d_k@xxxxxxxxxxx>]

--- In ukha_d@xxxxxxx, "Jon Whiten" <jon@w...> wrote:
> Is there a key-combination (Fn + F7) that toggles LCD-->LCD+Crt--
>CRT-->...
> ?  If so, switching to CRT (with nothing plugged in) may shut-down
the LCD
> and kill the noise.
>
> ;oj

Hi Jon,

I'm still saving to buy a 7 or 8" "remote" touchscreen tft
so I can
have it build in my living room wall, in the meantime I still will
have the need to see what I'm doing :-) - but I'll check it out to
see if it helps.

rgds Rob.
>
>
> -----Original Message-----
> From: egelbeertje [mailto:r_d_k@h...]
> Sent: Wednesday, January 26, 2005 11:29 AM
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] node0 RF interference
>
>
>
> Hi,
>
> I recently replaced my old p120 mp3jukebox pc with a "more recent
P2/300"
> dell laptop to do the same job for obvious space saving/noise
reasons.
> However, the craptop seems to generate a lot of RF and HV(from the
> TFT) interference in the 3 receivers I have setup nearby.
> I am not using an aerial on the tuners (all Onkyo) but a coaxial
cable feed
> so there should be 1) a very strong signal and 2)less possibility of
> interference. I already tried to increase the distance between the
laptop
> and the tuners but can't move it more than 50 cm away. Now usually
if I
> listen to the radio I don't need to have the jukebox working but I
also want
> to use it for controlling lights etc -  so it basically needs to be
on all
> the time.
> Any suggestions to kill the interference more than welcome - I
noticed that
> if the screensaver kicks in and the TFT goes blank, some of the
high pitch
> noise is also disappearing.
>
> rgds Rob