The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Comfort Keypads




Paul Gale wrote:
> Hi Mark,
>
> You might be better off asking this on the Comfort technical group as
well.
>
> I currently have 5 keypads and a door phone - in the entrance hall,
landing, utility door, garage, workshop. Door phone is obviously at front
door.
>
> I'd say they are pretty useful to have anywhere where you want to
arm/disarm but also for the more advanced things like opening electronic
locks etc. I have an Abloy electronic lock on one door (very expensive but
incredibly well made and very secure with manual high security key). I can
sign in to Comfort and then operate the lock.
>
> You don't necessarily need that may keypads though depending on what
else you're doing HA wise. For instance, I also have a Visonic powercode
receiver and a number of 4 button keyfobs. I program Comfort and HomeVision
so that one button each unlocks the door, locks the door, opens the garage
door and turns on/off a number of lights. All these actions also have
secondary actions e.g. unlocking the door turns on several relevant lights
(if it's dark), some of which are on a timer then turn off after a few
mins. Unlocking the door also disarms Comfort if armed. The keyfob is meant
to be very secure with a rolling code system. If you put in any other type
of button or interface, you just need to be wary about how secure it is.
>
> I found the keypad on the landing to be the most used initially - but
now I can also see the arm status on the TV via HomeVision and arm/disarm
in bed if I've forgotten to arm it!
>
> It starts to get pretty clever and once the hardware is in place, you
can do pretty much anything :)
>
> Paul.

Aha, OK, I might have a slight rethink then :) Thanks.




UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.