Re: Re: KAT5 Scart and IR Distribution

["Frank Mc Alinden" <frankmc@xxxxxxxxxxxxxxxx>]

Hi Stuart


> That would be good if you wouldn't mind.  I have ver 2 KAT5.

Ok ...contact me offlist and give me your address details...
frankmc AT internode DOT on DOT net

> Was there something particualar you were looking for??

Just browsing to see if you had done anything new ;-))

> It's 1500 here in the UK, so I reckon that makes you about 1 hour
> into 2006??  Happy New Year!!

Was actually 2am here ;-)) Happy New Year to you ...

Frank



----- Original Message -----
From: "Stuart Whyte" <groups@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Sunday, January 01, 2006 2:18 AM
Subject: [ukha_d] Re: KAT5 Scart and IR Distribution


> Hi Frank,
>
> That would be good if you wouldn't mind.  I have ver 2 KAT5.
>
> As for the site, I took it down around 6 months ago as I sold my
> flat, and have yet to automate my new place.  I keep meaning to put
> up an "archive" site of what was, but never seem to have the
time.
> Was there something particualar you were looking for??
>
> It's 1500 here in the UK, so I reckon that makes you about 1 hour
> into 2006??  Happy New Year!!
>
> Cheers
>
> Stuart
>
> --- In ukha_d@xxxxxxx, "Frank Mc Alinden"
<frankmc@i...>
> wrote:
>>
>> Hi Stuart
>>
>> Sorry forgot Keith had a bereavement in his family...
>>
>> If your not in a big hurry i can modify my 4 way splitter to make
> it a 2 x2
>> and try it with  my KAT5 IR ver1 or ver 2 (let me know ) and if
all
> seems ok
>> i can send it on .....Even if  the tx ir is  being  driven
directly
> out by a
>> pic pin i *think* it will be ok ...i reakon the drive current for
2
> x 2 will
>> be around 5ma and the pic pins can drive approx 20ma...Let me know
> if your
>> interested and  i can put something together over the next few
> days...
>>
>> Frank
>>
>> PS.....Is your site still down ??? i from time to time have trie
to
> hae a
>> look without any joy...
>>
>>
>> ----- Original Message -----
>> From: "Stuart Whyte" <groups@f...>
>> To: <ukha_d@xxxxxxx>
>> Sent: Saturday, December 31, 2005 8:42 PM
>> Subject: [ukha_d] Re: KAT5 Scart and IR Distribution
>>
>>
>> > Thanks Frank,
>> >
>> > Keith, any comments?
>> >
>> > Cheers
>> > Stuart
>> >
>> > --- In ukha_d@xxxxxxx, "Frank Mc Alinden"
<frankmc@i...>
>> > wrote:
>> >>
>> >> Hi Stuart
>> >>
>> >> > It is actually 3 outputs I'd be looking for - 2 x IR
emittes
> and
>> > 1 x
>> >> > RF2Link.  Would one of your 4 way splitters do the
job?
>> >>
>> >> Nah....This would give you 4 emiiters but all are in
series meant
>> > to be
>> >> connected to a 12v ir source rather than a 5v
one....Maybe you
>> > could have 2
>> >> in series and one in parallel (with a series resistor)
with these
>> > two..But
>> >> you would have to confirm with Keith that his transistor
driver
>> > would handle
>> >> it ok ..and also produce the hardware to allow this to
>> > happen ...which would
>> >> be quite easy....
>> >>
>> >> HTH
>> >> Frank
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> > Yahoo! Groups Links
>> >
>> >
>> >
>> >
>> >
>> >
>>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>