Re: Projector Screen Control

["Chris Purves" <CHRIS_PURVES@xxxxxxx>]

I programmed the 'down' ir command on the unit to the on button of my
sony projector remote and the 'up' to the off button. Worked
flawlessly. Costs about =A3300 though but it will defo do the job.


Chris
--- In ukha_d@xxxxxxx, "Brian Milton" <bmilton@b...> wrote:
>
> Thanks Chris,
>=20
> Looks like a good piece of kit.  This will do the job, and might link
> it up with the curtains as well. :)
>=20
> Cheers
>=20
> Brian
>=20
> --- In ukha_d@xxxxxxx, "christopher purves"
> <CHRIS_PURVES@M...> wrote:
> >
> > Hi,
> >=20
> > This is a fantastic little unit.
> >=20
> > http://www.marata.co.uk/Downloads/mcu300-4spec-sheet.pdf
> >=20
> > It has IR in and only needs power and will happily sit in your
ceiling.
> >=20
> > Programmerd from pc it will happily control your screen and
respond
> to IR.
> >=20
> >=20
> > Chris
> >=20
> >=20
> > >From: "Brian Milton" <bmilton@b...>
> > >Reply-To: ukha_d@xxxxxxx
> > >To: ukha_d@xxxxxxx
> > >Subject: [ukha_d] Projector Screen Control
> > >Date: Tue, 13 Dec 2005 09:54:24 -0000
> > >
> > >Hi guys,
> > >
> > >Looking to control my Projector screen.  I ran a 2.5 T&E
to my screen
> > >when i was wiring thinking i can contol my screen from my
Node0.  But
> > >the screen has a four core cable! oops!  So now all i can do
is
supply
> > >the screen with power throught the T&E.  I was wondering
if there is
> > >any sort of IR controlled relay or somehting that i could put
in the
> > >ceiling beside the screen and control it with my remote. 
Would like
> > >to have a flush plate on the ceiling with just the IR seen. 
Would an
> > >X10 type device be the way to go?
> > >
> > >Also i would like to be able to set a timer? so that the
screen stops
> > >where i want it not all the way to the end.  Or is there a
way to
> > >change where the motor stops as it goes down a little to far?
 Oh i
> > >have a Cat5e cable running to node0 and one directly to my
projector
> > >if they would help in any ideas.
> > >
> > >Any pointers?
> > >
> > >Thanks
> > >Brian
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
>