The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Fw: External PIR's


  • Subject: Re: Fw: External PIR's
  • From: "Nick" <nick@xxxxxxxxxxxxxxx>
  • Date: Wed, 31 Aug 2005 20:05:36 -0000

Beware the choice of OPAL versus ELITE.  The ELITE has two outputs
and, from memory the OPAL only has one.  Fine for Comfort on its own,
but mine trigger the camera recording 24x7 and C-Bus lighting (via a
four channel aux unit) when it's dark - hence I needed two contacts.

On C-Bus, there is another gotcha - the GJD units have an open
collector output.  The C-Bus aux inputs are commoned "the wrong
way"
which results in very strange behaviour.  That leads to using a very
small relay in between.  By small, I mean low-current - beware the
GJD's limits and remember to put in a diode to suppress the nasty back
EMF from the relay coil.

Have fun!!

Nick





UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.