[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: CBus / X10 Opinions please
- Subject: Re: CBus / X10 Opinions please
- From: "K. C. Li" <li@xxxxxxxxx>
- Date: Tue, 16 Aug 2005 22:49:29 +0100 (BST)
On Tue, 16 Aug 2005, Gerry Duprey wrote:
> connected. I've had my X10 and oscope on the lines before (with
everything
> in the house ON) and never saw any significant noise (baring X10
xmissions),
> so I know the house was quiet before,
Before thinking about scraping your X-10 system, it might be worth
considering the installation of an X-10 signal repeat/amplifier to boost
the signal level to, hopefully, above the noise floor.
ACT do a range of effective coupler/repeaters which, for the CR244 anyway,
would boost the X-10 signal from a few hundred mV to 5V. That should
ensure a healthy X-10 signal everywhere in the house, assuming the noise
level is well below that.
Regards,
Kwong Li
li@xxxxxxx
Laser Business Systems Ltd.
http://www.laser.com
http://www.cbus-shop.com
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|