[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Re: DIY Heating Interface - Review
Hi Steve
>If you need some Frank, I'll send you some, just let me know how many
you
>may need.
Thanks ....But you would get the both of us locked up if customs scanned
the parcel and noticed what was inside ....;-))......and then try
convincing
them its for home automation ;-))
I like the other one better......
Thanks
Frank
----- Original Message -----
From: "steve_stealth2004" <email@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Saturday, August 13, 2005 7:13 PM
Subject: [ukha_d] Re: DIY Heating Interface - Review
--- In ukha_d@xxxxxxx, "Frank Mc Alinden" <frankmc@i...>
wrote:
> Hi Steve
> Pic looks good are they both bullet shells ??
One of them is made from a brass clothing button cap with the shaft
of a Bic biro pen. The other is encapsulated in an empty bullet
shell casing.
The button cap version was intended to be mounted flush in a interior
wall with just the brass button cap showing. (Approx size:- length =
25mm, black shaft = 6mm and button head is = 12mm x 1mm) of course
it doesn't need to be brass you could choose one to suit your
décor..
The bullet shell is intended to be used outdoors and can be
submerged. (Approx size:- length = 25mm, diameter is 10mm)
> where would you source empty bullet shells i wonder ??
I got mine from a gun shop, the guy gave me a bag full, must be
around 50-100 for £4. If you need some Frank, I'll send you
some,
just let me know how many you may need.
Steve
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|