[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Master / Slave for CD-ROM ??
- Subject: RE: Master / Slave for CD-ROM ??
- From: "Hawes,Timothy Edward \(GEG\)" <haweste@xxxxxxxxxxxxxxx>
- Date: Tue, 7 Sep 2004 09:50:41 +0100
> -----Original Message-----
> From: Lee Sent: 07 September 2004 09:30
>
> So currently you have just one HD connected to the mobo?
Yes.
> Does it boot if it's connected as master to the secondary channel?
I wasn't brave enough to try without asking first, but will give it a go
now.
> Lee
Thanks,
Tim H.
> -----Original Message-----
> From: Hawes,Timothy Edward (GEG) Sent: 07 September 2004 09:14
>
> Guys,
>
> Bit of a basic question I think. I've got a mobo with primary &
> secondary IDE channels, HDD connected to primary & boots
> fine with CD
> unconnected. The PC wont boot though if the CD drive is set
> to Slave and
> installed on the secondary IDE channel.
>
> Do I need to set the CD drive as a Master for the secondary
> channel ?
>
> Thanks,
>
> Tim H.
+
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|